M880 WAVE2 S - OPTIONALS

LCD Display and LEDs for DATA-FEEDBACK 


All radio remote control families of the new M880 series can be enriched with the option Data-Feedback to allow the visualization of operating parameters and messages on an alphanumerical LCD display or by means of LEDs, from the sensors installed on the machine (for example, loads, distances, speeds, cable lengths, wind speed, etc.).

 

TRANSPARENT SLEEVE FOR WAVE2 S

 

The highly-resistant and elastic transparent sleeve represents an additional protection that facilitates the use of your WAVE2 S even in extreme working conditions, but without altering its ergonomic shape.

 

AUXILIARY COMMAND: ROTATING SELECTOR

 

As if that wasn’t enough...

A housing is available in which an additional command is fitted, that can be chosen from a rotating commutator, potentiometer, trigger selector with 2-3 stable or unstable positions and a single click button.

 
 

AUXILIARY COMMAND: POTENTIOMETER

 

As if that wasn’t enough...

A housing is available in which an additional command is fitted, that can be chosen from a rotating commutator, potentiometer, trigger selector with 2-3 stable or unstable positions and a single click button.

 
 

AUXILIARY COMMAND: TRIGGER SELECTOR

 

As if that wasn’t enough...

A housing is available in which an additional command is fitted, that can be chosen from a rotating commutator, potentiometer, trigger selector with 2-3 stable or unstable positions and a single click button.

 
 

Auxiliary command: Single-step pushbutton


The handheld transmitter offers a space in which to insert an additional command that can be  actuated by means of a rotary switch, potentiometer, 2 or 3 position (stay put or return-to-center) toggle switch or a single-step button

 
     

SINGLE-JOINT SHOULDER STRAP


As an alternative, IMET offers an extremely resistant nylon shoulder strap that allows you to carry along your handheld transmitter without bothering you.

 
     

 

 

Multi-receiver and / or Multi-transmitter configuration 


IMET makes available to its users, special radio remote control configurations that allow, by a simple selection command, to macht one receiver with more than one transmitter or alternatively, severeal transmitters to one or more receivers. This is particulary useful when operating industrial cranes.
a) The available configuration are Tandem, Take/Release and Master/Slave, aimed at satisfying the most demanding operational requiremets.
b) Selectable receivers: allow to select from a single trnasmitter up to 8 receivers or 8 combinations of more recievers. 

 
 

 

Torna all'inizio pagina