M550 M8 - OPTIONALS

LCD DISPLAY AND FEEDBACK RELAY

 

Information for your safety

The data-feedback option allows visualisation on the alphanumerical LCD display of parameters and messages from sensors installed in the unit. (For example: loading cells, distance from the trolley to the tower, length of lifting cables, wind speed, etc... Exclusively for the IMET M8 transmitting unit, 16 exit relays are available that signal the operational state of the unit.

 
 

THE TRANSPONDER

 

Beyond all obstacles. 

The IMET transponder has been developed to overcome critical obstacles of radio transmitting from the operator and to the receiver onboard the machine. This can also result as being useful to resolve situations that require limits different from normal. In normal conditions the cover range is approx 100m but the presence of reinforced cement or metal walls and natural barriers can strongly interfere with radio transmission. Users of cleaning machines, cranes and forestry machines are typically subject to these problems. The compact size and the IP65 case with battery power, allow an easy and quick positioning of the transponder in the optimal spot. This can be matched with all IMET M550S systems by a simple synchronisation procedure. The original radio remote control can be used to work just as easy in the basic configuration only with the transmitter and receiver.

SUPPLIED KIT:

The supplied kit comprises: A M550TPDR transponder, a battery charger, two removable Ni-MH rechargeable batteries, a user manual and an EU declaration of conformity.
 
 
 

MULTI RECEIVING AND/OR MULTI TRANSMITTING CONFIGURATION

 

Being in large numbers is no longer a problem

IMET provides its users with special configurations that allow, by merely using a selection command, alternative matching of a receiver plus a transmitter unit or from transmitters to one or more receiver. 
a)    These are the available configurations to satisfy even the most complex operational needs in crane industry: Tandem, Acquire/Release, Master/Slave. 
b)    Selectable receivers: allows selection from a single transmitter to up to 8 receivers or 8 combinations of more receivers.

 
 

HAC RECEIVER UNIT WITH ATEX CERTIFICATION

 

Group II unit. Unit destined to be used in environments were the risk of an explosive atmosphere is high;
High level of protection: category 2. Unit designed to be used in environments were the risk of an explosive atmosphere caused by gas, vapours, fogs or a mixture of air and dust, is high.
Potentially explosive gas and dust protection system. The unit remains charged and operational in zones 1, 2 (G) and 21, 22 (D);
Explosion-proof casing.
Temperature class 85°C. 
Completely protected against dust and strong water jets (IP66); Predisposed drawer with a 1” IOS7/1RC press cable and ¾” IOS7/1RC barrier for live cables with these specifications: ATEX Ex ll2GD Exd llC IP 66; Range, obstacle free 70m.
 

‚Äč
 

 

Torna all'inizio pagina